We recommend that our users watch this Tutorial Video with the following quick steps for setting up the Ergo Stand with your Cintiq Pro 24/32:
Video: https://youtu.be/Z5rDIRj3k3M
- Place your Wacom Cintiq Pro on a flat surface
- Open the cable cover on the back of the Wacom Cintiq Pro, and remove the small cover on the bottom of the cable cover used for cable routing with the Ergo Stand
- Unbox the Ergo Stand with the instructions included.
- Attach the Ergo Stand mounting plate to the Wacom Cintiq Pro using middle length silver screw attached in the box (Wacom Cintiq Pro24 x4 pcs, Wacom Cintiq Pro32 x 6 pcs )
- Attach the Wacom Cintiq Pro with the mounting plate onto the rotating center of the Ergo Stand bar.
- Follow the cable routing instructions of the Ergo Stand
- When the cables are routed on the joint block, the cables should not be tight in the grooves.
- Close all covers of the Ergo Stand after routing the cables, using short length black screws with the arm cover (L/R each side x 3 pcs.) and use long silver screws with back cover(4 pcs)
- Close the cable cover on the back on the Wacom Cintiq Pro.
- Attach the lever to the Ergo Stand after closing all of the covers using short length silver screws with the lever (L/R each side x 4 pcs)
- Connect your power supply and PC and press the power button to start using your Wacom Cintiq Pro.