Before setting up a VR HMD, you need to prepare the following:
- USB-C to USB-A (3.0) adaptor (for HMD)
- HDMI to mini HDMI adaptor (for HMD)
- USB-C to USB-A (3.0) hub with 2 or more ports (for any sensors if needed)
A VR HMD usually has two connectors on the cable, USB-A 3.0 and HDMI. We recommend referring to the included Quick Start Guide, Wacom tutorial videos, or the online User Manual for more detail, however, here the steps for setting up a VR HMD with the Wacom Cintiq Pro Engine.
To connect with VR/AR HMD:
- Connect the USB-C to USB-A (3.0) adaptor into the USB-C port located adjacent to the mini-HDMI port
- Connect the USB-A cable from the HMD into the USB-C to USB-A (3.0) adaptor
- Connect the HDMI to mini HDMI adaptor into the miniHDMI port on the Wacom Cintiq Pro Engine
- Connect the HDMI cable from the HMD to the mini HDMI adaptor
To connect with VR/AR sensors:
- Connect the USB-C to USB-A (3.0) Hub into the USB-C port located adjacent to the LAN port (in the middle of the Wacom Cintiq Pro Engine).
- Connect the USB-A cable from the sensors into the USB-C to USB-A (3.0) Hub. PLEASE ONLY CONNECT THE SENSOR CABLE TO THE USB-C PORT ADJACENT TO THE LAN (NETWORK) PORT ON THE WACOM CINTIQ PRO ENGINE.
- Download and run the setup software provided by the manufacturer of your HMD.
- Start using your HMD