Before you begin the steps below, open the two cable cases on the back of your Cintiq Pro by pulling each case cover up (1) and out (2) to expose the ports on your Cintiq Pro.
Connect your Cintiq Pro to your computer using one of the methods illustrated in the table below:
Port(s) on your computer | Cable(s) needed to connect the Cintiq Pro to your computer |
---|---|
USB-C DisplayPort Alt mode (supports graphics output) |
USB-C to C cable inserted into the USB-C DisplayPort on the back, left side of your Cintiq Pro |
USB-C port (does not support graphics output) DisplayPort |
USB-C to C cable inserted into the USB-C port located on the back, right side of your Cintiq Pro Mini DisplayPort to DisplayPort cable |
USB-C port (does not support graphics output) HDMI port |
USB-C to C cable inserted into the USB-C port located on the back, right side of your Cintiq Pro HDMI cable |
USB-A port DisplayPort |
USB-C to A cable inserted into the USB-C port located on the back, right side of your Cintiq Pro Mini DisplayPort to DisplayPort cable |
USB-A port HDMI port |
USB-C to A cable inserted into the USB-C port located on the back, right side of your Cintiq Pro HDMI cable |
- Connect your device to a power source using the power cable and AC adapter. The power connection port is on the back, left side of your Cintiq Pro.
- Secure the cables using the attached bands on each side of your Cintiq Pro and thread the cables through the top of each case. Close the case covers by sliding the cover in (1) and down (2).
- Wrap the cables together on each side using the cable ties included with your Cintiq Pro.
- Press the power switch to turn your Cintiq Pro on.
- Visit wacom.com/download to install the Wacom driver.