You many need to replace your clips on your MobileStudio Pro. Please use the clip kit provided in your packaging, under the Quick Start Guide, which includes:
- 4 Clips
- 4 Screws
- 1 Torx Screw Driver
- 1 Instruction card
Also, please view this Clip Replacement Tutorial Video or follow these step-by-step instructions to replace your clips:
- Carefully remove clips, small screws and screw driver from the package.
- Using the screw driver, loosen all 4 screws on the back of the device.
- Carefully push on the end of the clip furthest from the screw opening to lift the clip off the back of the device.
- Insert all 4 new clips first to ensure you do not drop the screws into the device.
- Insert new screws and tighten until you feel some resistance.
- Attach Wacom Stand to Device.
CAUTION: DO NOT overtighten as this may strip the screw and damage your device!