Bamboo Ink Plus

As a portable accessory with special features, the Bamboo Ink Plus needs to generate its own power and hence requires a battery.

To give you the most authentic feel while writing and sketching on screens, you can choose between three kinds of pen nibs. Slide to open the nib kit and choose from left to right: Firm (White), Soft (Gray). ...

A Blue LED turns on when you Bamboo Ink Plus is ready for paring. When it is slowly flashing, Bamboo Ink Plus is inside the pairing mode. After your Bamboo Ink Plus is successfully paired with your device, a ...

Make sure your Bamboo Ink Plus is paired to your device. You can check from the Windows Start menu, select Settings> Devices > Bluetooth®. If pressing the top button still doesn’t launch the app, you might ne...

Yes. Bamboo Ink Plus power on when you press front side switch for 1 sec and power off when you press it for 5 sec. Also, Bamboo Ink Plus will be activated by a click on the screen. After a tail short period ...

The Bamboo Ink Plus is a high-precision stylus that continuously detects and transmits the pressure you apply on the surface of your Windows devices. The number of pressure levels depends on your hardware and...

With the Bamboo Ink Plus, your lines, letters and characters look the way you intend because the stylus senses the slightest movement of the pen tip (position, speed, direction) and change of applied pressure...

The Bamboo Ink Plus has two side buttons on the body of the stylus that will change your compatibility setting mode. By pressing and holding both side buttons at same time for 2 seconds you can change the com...

To enable this function, you need to pair Bamboo Ink Plus to your device via Bluetooth®. After paring to your device, clicking the button gives you direct access to the apps you want to use and a convenient s...

From the Windows Start menu, select Settings> Devices > Bluetooth® and make sure Bluetooth® is “On“. Hold the top button for 6 seconds then the Blue LED will start blinking. From the list of devices, select “...

A removal tool comes included and this one is located on the top side of the nib kit, there you will see a small hole. To pull the nib out of your pen to replace it, you must insert the tip of the nib that yo...

Gently slide upper case to right

Before you start using Bamboo Ink Plus, please charge it for approximately 3 hours for a full charge by using the USB-C cable include in the box. The remaining capacity of the battery decreases with time. If ...

Press and hold both side buttons at same time for 2 seconds to change the setting. LED underneath blinks once means Wacom AES and twice means Microsoft Pen Protocol. Initial setting is Microsoft Pen Protocol.

Bamboo Ink Plus works with all compatible pen-enabled devices that feature Wacom AES technology or Microsoft Pen Protocol. However, for devices using Wacom AES technology to use some of the unique features li...