Bamboo Ink

A Blue LED turns on when you Bamboo Ink is ready for paring. When it is slowly flashing, Bamboo Ink is inside the pairing mode. After your Bamboo Ink is successfully paired with your device, a LED flashes r...

There’s not an On/Off switch. The Bamboo Ink will be activated by a click on the screen. After a a short period of not being used it goes into sleep mode to save power.

As a portable accessory with special features, the Bamboo Ink needs to generate its own power and requires a battery. The battery life is approximately about 5 months (2 hours/day, 5 days/week) with Wacom Act...

The Bamboo Ink has two side buttons on the body of the stylus that will change your compatibility setting mode. By pressing and holding both side buttons at same time for 2 seconds you can change the compatib...

To enable this function, you need to pair Bamboo Ink to your device via Bluetooth®. After paring to your device, clicking the button gives you direct access to the apps you want to use and a convenient short ...

From the Windows Start menu, select Settings> Devices > Bluetooth® and make sure Bluetooth® is “On“. Hold the top button for 6 seconds then the Blue LED will start blinking. From the list of devices, select “...

To pair your Bamboo Ink 2017 (CS-321): Go to your Windows Start menu, select Settings> Devices > Bluetooth® and make sure Bluetooth® is “On“. Hold the top button for 6 seconds then the Blue LED will sta...

Slide to open the nib kit and choose from left to right: Firm (Black, Medium (Gray). or Soft (Black). The one that comes pre-installed with your Bamboo Ink is a Soft nib. The best thing to do is to try all th...

A removal tool comes included and this one is located on the top side of the nib kit, there you will see a small hole. To pull the nib out of your pen to replace it, you must insert the tip of the nib that yo...

In a gentle counter-clockwise move, you must twist the back end where the clip is located and align the solid dot mark from the back end with the empty dot mark from the barrel of the pen. This way you will r...

Press and hold both side buttons at same time for 2 seconds and then release to change the setting. Blue LED underneath blinks once means Wacom AES and twice means Microsoft Pen Protocol, Initial setting is W...

The Bamboo Ink works with all compatible pen-enabled devices that feature Wacom AES technology or Microsoft Pen Protocol. However, for devices using Wacom AES technology to use some of the unique features lik...